SRH液相循环加氢技术的开发及工业应用

化工进展 ›› 2012, Vol. 31 ›› Issue (01 ): 240-245.

SRH液相循环加氢技术的开发及工业应用

宋永一1，2，方向晨2，刘继华2

（¹天津大学化工学院，天津 300072；²中国石化抚顺石油化工研究院，辽宁抚顺 113001）

出版日期:2012-01-05 发布日期:2012-01-05

Development and commercial application of SRH liquid phase recycling hydrogenation technology

SONG Yongyi1，2，FANG Xiangchen2，LIU Jihua 2

（¹School of Chemical Engineering and Technology，Tianjin University，Tianjin 300072，China；
² Fushun Research Institute of Petroleum and Petrochemicals（FRIPP），SINOPEC，Fushun 113001，Liaoning，China）

Online:2012-01-05 Published:2012-01-05

摘要/Abstract

摘要： SRH柴油液相循环加氢技术是利用油品中的溶解氢来满足加氢反应的需要，以油品中氢浓度的梯度变化作为反应的推动力。该技术催化剂床层处于全液相中、接近等温操作，反应效率高、目的产品收率高；整套装置高压设备少，热量损失小，装置投资和操作费用均低。中型装置试验结果证明，SRH液相循环加氢技术可以在适宜的工艺条件下加工各种柴油原料，对原料适应性强、产品质量好。长岭20万吨／年SRH液相循环加氢装置工业应用结果表明：以煤油为原料可以生产合格的3^#喷气燃料；以常二柴油、催化柴油和常二柴油、焦化柴油的混合油为原料可以生产满足国Ⅲ质量标准的清洁柴油；以常二线柴油为原料，可以生产满足欧Ⅳ质量标准的清洁柴油，同时该装置长期稳定生产运行表明SRH液相循环加氢技术和关键设备成熟可靠。

关键词: 液相循环加氢溶解氢等温工业应用清洁柴油, liquid recycling, 液相循环, 加氢, 溶解氢, 等温, 清洁柴油, 工业应用

Abstract: SRH liquid phase recycling hydrogenation technology takes the advantages of hydrogen，dissolved in liquid phase，to meet the hydrogenation reaction requirements，in which hydrogen concentration grads in the oil can act as the driving force for the reaction. SRH technology is characterized by its catalyst bed fully submersed in the liquid phase and close to isotherm operation as well as its high reaction efficiency and high target product yield. In addition，both the unit investment and operating costs are lower because of fewer high pressure devices adopted and less heat loss. The pilot plant results showed that SRH technology had strong adaptability to feed and can be applied to process different diesel under suitable process conditions. The products were also with good quality. Besides，the commercial application results from SRH diesel phase liquid recycling hydrogenation unit with capacity of 20×10⁴t/a in Chang-ling Refinery showed that：qualified 3^# jet fuel can be produced using kerosene as feed；clean diesel with meeting national Ⅲ diesel specifications can be produced by blends of AGO，LCO as well as blends of AGO，CGO；clean diesel meeting national Ⅳ diesel specifications can be produced by AGO. Meanwhile，the longer stable running of this unit proves that SRH diesel products liquid recycling hydrogenation technology and key devices are mature and reliable.

Key words: liquid phase recycling, hydrogenation, dissolved hydrogen, isotherm, clean diesel, commercial application

宋永一1，2，方向晨2，刘继华2. SRH液相循环加氢技术的开发及工业应用[J]. 化工进展, 2012, 31(01 ): 240-245.

SONG Yongyi1，2，FANG Xiangchen2，LIU Jihua 2. Development and commercial application of SRH liquid phase recycling hydrogenation technology[J]. Chemical Industry and Engineering Progree, 2012, 31(01 ): 240-245.

[1]	时永兴, 林刚, 孙晓航, 蒋韦庚, 乔大伟, 颜彬航. 二氧化碳加氢制甲醇过程中铜基催化剂活性位点研究进展[J]. 化工进展, 2023, 42(S1): 287-298.
[2]	程涛, 崔瑞利, 宋俊男, 张天琪, 张耘赫, 梁世杰, 朴实. 渣油加氢装置杂质沉积规律与压降升高机理分析[J]. 化工进展, 2023, 42(9): 4616-4627.
[3]	张振, 李丹, 陈辰, 吴菁岚, 应汉杰, 乔浩. 吸附树脂对唾液酸的分离纯化[J]. 化工进展, 2023, 42(8): 4153-4158.
[4]	毛善俊, 王哲, 王勇. 基团辨识加氢：从概念到应用[J]. 化工进展, 2023, 42(8): 3917-3922.
[5]	王兰江, 梁瑜, 汤琼, 唐明兴, 李学宽, 刘雷, 董晋湘. 快速热解铂前体合成高分散的Pt/HY催化剂及其萘深度加氢性能[J]. 化工进展, 2023, 42(8): 4159-4166.
[6]	王晓晗, 周亚松, 于志庆, 魏强, 孙劲晓, 姜鹏. 不同晶粒尺寸Y分子筛的合成及其加氢裂化反应性能[J]. 化工进展, 2023, 42(8): 4283-4295.
[7]	于志庆, 黄文斌, 王晓晗, 邓开鑫, 魏强, 周亚松, 姜鹏. B掺杂Al₂O₃@C负载CoMo型加氢脱硫催化剂性能[J]. 化工进展, 2023, 42(7): 3550-3560.
[8]	金涌, 程易, 白丁荣, 张晨曦, 魏飞. 中国流态化技术研发史略[J]. 化工进展, 2023, 42(6): 2761-2780.
[9]	李栋先, 王佳, 蒋剑春. 皂脚热解-催化气态加氢制备生物燃料[J]. 化工进展, 2023, 42(6): 2874-2883.
[10]	陈怡欣, 甄摇摇, 陈瑞浩, 吴继伟, 潘丽美, 姚翀, 罗杰, 卢春山, 丰枫, 王清涛, 张群峰, 李小年. 铂基纳米催化剂的制备及在加氢领域的进展[J]. 化工进展, 2023, 42(6): 2904-2915.
[11]	徐贤, 崔楼伟, 刘杰, 施俊合, 朱永红, 刘姣姣, 刘涛, 郑化安, 李冬. 原料组成对半焦中间相结构发展的影响[J]. 化工进展, 2023, 42(5): 2343-2352.
[12]	王嘉, 彭冲, 唐磊, 陆安慧. 渣油加氢催化剂活性相结构调控及对反应性能影响[J]. 化工进展, 2023, 42(4): 1811-1821.
[13]	李玲, 马超峰, 卢春山, 于万金, 石能富, 金佳敏, 张建君, 刘武灿, 李小年. 新型含氟替代品1,1,2-三氟乙烯的合成工艺与催化剂研究进展[J]. 化工进展, 2023, 42(4): 1822-1831.
[14]	葛伟童, 廖亚龙, 李明原, 嵇广雄, 郗家俊. Pd-Fe/MWCNTs双金属催化剂制备及其脱氯动力学[J]. 化工进展, 2023, 42(4): 1885-1894.
[15]	萧垚鑫, 张军, 胡升, 单锐, 袁浩然, 陈勇. 甲醇供氢体系铜锌双金属催化糠醛加氢转化[J]. 化工进展, 2023, 42(3): 1341-1352.